一、功能介紹  Function introduction

①此設備用于全自動杯型口罩生產線(典型型號如N95口罩),設備整卷上料,多層水刺布，溶噴布，無紡布料卷經過 熱壓成型，重疊冷壓，PU超聲波焊接熔合,最終口罩裁切成型,自動貼鼻梁,自動耳帶焊接出成品。

生產口罩具有佩帶舒適,無壓迫感,口罩過濾效果好,契合人的臉形,可以適用于醫療,電子,礦業,建筑等行業.

This equipment is used for automatic cup mask production line (typical model, such as N95 mask). The equipment is used for feeding the whole roll, multi-layer spunlace cloth, dissolving spray cloth and non-woven fabric rolls through hot pressing, overlapping cold pressing, ultrasonic welding and fusion,automatic pasting of foam, and finally cutting and forming the mask, automatic hot pressing of nose bridge and automatic welding of ear straps into finished products. The production of masks is

comfortable to wear, no sense of pressure, good filtering effect, fit the shape of human face, can be

applied to medical, electronics, mining, construction and other industries.

②本機采用PLC、觸摸屏控制、主傳送帶采用進口伺服電機輸送、，傳動精確，控制穩定，速度可調。

This machine adopts PLC, touch screen control, main conveyor belt adopts imported servo motor transmission, accurate transmission, stable control, adjustable speed.

二、產品特點  Product characteristics

①整線完全全自動化,生產速度快每分鐘15-20PCS,工作過程中上料可不停機生產。

The whole line is fully automated, with a production speed of 15-20PCS per minute, and can be produced without shutdown during feeding.

②熔噴可冷壓,產品品質可達到FPP3等級

Melt spray can be cold pressed, the product quality can reach FPP3 grade

③自動貼鼻梁，位置精準美觀。

Automatic nose bridge, accurate and beautiful position

④設備維護方便，模塊化設計，可快速拼接，實現快速生產。

The equipment is easy to maintain, modular design, can be quickly spliced, to achieve rapid production.

⑤設備尺寸小，2700*2000*1800/3500*1500*1800mm占地少方便空運。  

The equipment size is small, 2700*2000*1800/3500*1500*1800mm covers an area of less convenient air

transport.

⑥每個模塊可單獨使用，自由組合。

Each module can be used separately, free combination.

⑦加工件鋁合金硬氧處理，機架采用鑄鐵焊接，烤漆，美觀堅固不生銹。

the processing workpiece aluminum alloy hard oxygen processing, the frame adopts cast iron welding,       

baking paint, beautiful, solid and not rust.

⑧PLC(三菱PLC)編程控制，穩定性高、故障率低、噪音少。

PLC(Mitsubishi PLC) programming control, high stability, low failure rate, less noise.

⑨采用進口伺服馬達，進口氣動元件，精度高。 

 Adopt imported servo motor, imported pneumatic components, high precision.

⑩用料尺寸小，光電檢測原料，避免失誤減少浪費。  

The material size is small, photoelectric detection of raw materials, avoid mistakes and reduce waste.

?機臺采用滑輪及固定腳，移動方便快捷，固定性強，不動搖.

The machine adopts pulley and fixed foot, which is convenient and fast to move, strong and fixed, and

does not waver.

3.技術參數 Technical parameters

   ①機器尺寸長寬高：6000mm*2050mm*1800mm 可拆分為2700*2000*1800/3500*1500*1800mm兩部分

Machine size length width height: 6000mm*2050mm*1800mm can be split into

2700*2500*1800/3500*2300*1800mm two parts

②重量：總重  2.8T 拆分后 1.3T/1.5T

Weight: Total weight 2.8T 1.3T/1.5T after splitting

③電壓： AC380V   50-60HZ

Voltage: AC380V 50-60Hz

④ 生產效率：15-20片/分

Production efficiency: 15-20 pieces/min

⑤功率：20KW

Power: 20KW

⑥耗氣量：35m3/min 氣壓0.6MPa（適配22KW空壓機）

Air consumption: 35m3/min Air pressure 0.6Mpa (suitable for 22KW air compressor)